Palmer IndustriesMinimal Style 1-1/2" Diameter Two Leg System with No Rear RisersLS2M-PBUL

This Palmer model with a single-piece, unadorned, tapered leg and Minimal fittings affords a modern and “clean” feel for today’s finer bathrooms. Historically, the tapered leg provided a departure from the rigid designs of the common, thick, straight-lined furniture of the past. This refined and slender shape terminates at the floor in a simple, socket-type foot, with perfectly matching top cap, and sleek, coped corner sockets.

This 2-leg model with legs tapering from 1.5” diameter to ?” diameter is designed for a single-sink vanity top. It has a simple, socket-type foot, top cap, and coped sockets, with 1.0” diameter crossbars. There are NO REAR RISERS with this model.

• Overall Dimensions: 32" W x 22" D x 33" H
• Size may be cut to fit on site with a chop saw blade or tubing cutter.
• The standard size of this model will accommodate up to a 36” wide x 24” deep vanity top
• Pictured vanity top not included
• All Palmer leg models are included with complete assembly instructions, wall support bracket, all mounting hardware, leveling shims, tile anchors, hex wrench, extra set screws, locating pins, silicone, and polish.
• Optional Reeded Horizontal Tubing available
• Standard Crossbar is straight. Curved crossbar is available in two sizes

NOTE: It is the responsibility of the installer to ensure that all sink tops are adequately and securely fastened to the wall, independent of the Palmer System. An aluminum angle bracket is included with each leg system to assist with this attachment, but additional support may be required for extra heavy/wide sink tops -available in options. Plated standard weight wall bracket also available in options.