|Brand||SanifloShop All Saniflo|
A simplex grinder system, fully pre-assembled with its unique above the floor installation.
The Sanicubic 1 operation is as simple as the installation. The effluent enters the pump through one of four different inlets one on either side of the unit at the bottom and two along the top. The inlets can accommodate 1-1/2 or 4ÂÂ diameter pipes. As soon as the wastewater level reaches the trigger point, the pumping system activates. The effluent is then pumped out through 1-1/2" diameter rigid pipe connected on the top of the pump. Maximum pumping distances are 36 Ft vertically and/or 328 Ft horizontally.
The inside of the Sanicubic 1 comprises of a couple of pressure switches and a circuit board assembly, which starts and stops the unit, a powerful motor, which drive the stainless steel cutting blade and the pump. The motor is sealed for life in an oil filled enclosure. A common spindle/shaft drives the impeller and the macerator blade. The moving parts therefore are kept to an absolute minimum. Water and organic waste matter that enter the enclosure are reduced to slurry and are picked up by the impeller mounted beneath the motor.
Write Your Own Review
Did you purchase a Saniflo 089? Write your own review.