Palmer IndustriesTapered Leg Three Leg System for Double SinkLS3TL

This Palmer model with a single-piece Tapered Leg affords a truly classic feel for today’s finer bathrooms. Historically, the tapered leg provided a departure from the rigid designs of the common, thick, straight-lined furniture of the past. This refined and slender shape terminates at the floor in a small, tapered foot.
The decorative ring, top cap, foot, and corner sockets all coordinate perfectly..

This 3-leg model with legs tapering from 1.5” diameter to ⅞” diameter is designed for a DOUBLE-sink vanity top. It has a small tapered foot, decorative ring and top cap, and 1” diameter crossbars. There are NO REAR RISERS with this model.

• Overall Dimensions: 68" W x 22" D x 32" H
• Size may be cut to fit on site with a chop saw blade or tubing cutter.
• The standard size of this model will accommodate up to a 72” wide x 24” deep vanity top
• All Palmer leg models are included with complete assembly instructions, wall support bracket, all mounting hardware, leveling shims, tile anchors, hex wrench, extra set screws, locating pins, silicone, and polish.
• 1-1/2" Diameter round leg at top
• 7/8" Diameter leg at bottom
• 1" Diameter horizontals
• NO REAR RISERS

NOTE: It is the responsibility of the installer to ensure that all sink tops are adequately and securely fastened to the wall, independent of the Palmer System. An aluminum angle bracket is included with each leg system to assist with this attachment, but additional support may be required for extra heavy/wide sink tops -available in options. Plated standard weight wall bracket also available in options.